Last Updated on December 24, 2022
Are you an international student? and been puzzled by the contradictory information you encountered on the internet. You need not look further, this article allows you to learn more about kennesaw state university graduate programs.
Read on to discover the latest information on kennesaw state university acceptance rate. It is possible for you to find more information about kennesaw state university ranking in the world on infolearners.
About Kennesaw State University Ranking
Earning a degree at Kennesaw State University’s Southern Polytechnic College of Engineering and Engineering Technology allows students each year to become a successful part of the innovative engineering industry. And better yet, companies are looking at KSU more and more each year for its thriving and well-rounded graduates to hire.
Engineering graduates from KSU have a distinct advantage that’s hard to find elsewhere. According to learnearn.gosa.ga.gov, graduates have a higher earning potential:
Bachelor’s degree in Engineering annual salary is 75% higher after one year than the average of all Bachelor degrees
Bachelor’s degree in Engineering Technology annual salary is 71% higher after one year than the average of all Bachelor degrees
Masters graduates in Engineering earn 33% higher after one year than the average of all Master’s degrees
And not only do engineers have the potential to earn more in the work place, but engineers from Kennesaw State are also graduates of a nationally ranked college. U.S. News & World Report has once again ranked KSU online programs among its “Best Online Programs” for 2017, including engineering masters’ programs for the first time. Ranked at No. 56, Kennesaw State was the only Georgia institution named to the engineering programs ranking. And at No. 9, Kennesaw State University was awarded high regards for the 2017 Best Online Colleges with our online bachelor’s and master’s degrees from bestcolleges.com.
When searching for an engineering degree that will set you a part and set you up for success, choose Kennesaw State University.
U.S. News and World Report
Ranked among the top public universities and 20th nationally in “National Universities Where Most Accepted Students Enroll” (admissions yield rate)
Ranked among National Universities in “2021 Best Colleges”
Best Undergraduate Engineering programs (top 100 nationally among schools with bachelor’s and master’s-level engineering degree programs)
Best Online MBA program (94th among programs nationally, 4th in Georgia)
Best Online Graduate Information Technology program (among top 75 nationally, 2nd in Georgia)
Best Online Graduate Engineering programs (ranked among top 100 in nation, only Georgia institution named)
American Council of Trustees and Alumni
An “A” rating for high-quality core curriculum (11th consecutive year named, one of top 24 colleges nationally)
Top 50 Online MBA Programs (29th nationally)
Top 50 Game Design Programs for Undergrads (37th nationally)
Guide to Green Colleges: 2021 Edition (named among 416 colleges nationally)
Top Music Business Schools (named among 28 nationally)
Best Online Bachelor’s Degree Programs in
Geography (ranked 4th in nation)
Cybersecurity (ranked 7th in nation)
Information Technology (ranked 10th in nation)
If you are interested in studying civil engineering, you may want to check out the program at Kennesaw State University. The following information will help you decide if it is a good fit for you.
KSU Georgia is located in Kennesaw, Georgia and approximately 37,807 students attend the school each year. Of the 5,351 students who graduated with a bachelor’s degree from Kennesaw State University in 2019, 65 of them were civil engineering majors.
Want to know more about the career opportunities in this field? Check out the Careers in Civil Engineering section at the bottom of this page.
KSU Georgia Civil Engineering Degrees Available
- Bachelor’s Degree in Civil Eng
- Master’s Degree in Civil Eng
Online Classes Are Available at KSU Georgia
Don’t have the time or the flexibility in your schedule to take traditional classes? Online courses may be the perfect solution for you. They allow independent learners to study when and where they want to while offering the rigor of in-person classes.
KSU Georgia does offer online education options in civil eng for the following degree levels for those interested in distance learning:
- Master’s Degree
KSU Georgia Civil Engineering Rankings
The following rankings from College Factual show how the civil eng progam at KSU Georgia compares to programs at other colleges and universities.
Note: Although rankings can help you see some information about a school, it’s not a good idea to depend on them alone. Be sure to check out other things about the school before making your decision to attend.
Bachelor’s Degree Overall Quality & Other Notable Rankings
The civil eng major at KSU Georgia is not ranked on College Factual’s Best Colleges and Universities for Civil Engineering. This could be for a number of reasons, such as not having enough data on the major or school to make an accurate assessment of its quality.
|Best Value Civil Engineering Schools||81|
|Most Popular Civil Engineering Schools||106|
|Most Focused Civil Engineering Schools||182|
Earnings of KSU Georgia Civil Eng Graduates
The median salary of civil eng students who receive their bachelor’s degree at KSU Georgia is $55,800. Unfortunately, this is lower than the national average of $58,200 for all civil eng students.
Civil Eng Student Demographics at KSU Georgia
Take a look at the following statistics related to the make-up of the civil eng majors at Kennesaw State University.
KSU Georgia Civil Engineering Bachelor’s Program
15%WOMEN42%RACIAL-ETHNIC MINORITIES*During the 2018-2019 academic year, 65 civil eng majors earned their bachelor’s degree from KSU Georgia. Of these graduates, 85% were men and 15% were women.
About 51% of those who receive a bachelor’s degree in civil eng at KSU Georgia are white. This is typical for this degree on the nationwide level. Prospective students may be interested in knowing that this school graduates 16% more racial-ethnic minorities in its civil eng bachelor’s program than the national average.*
The following table and chart show the race/ethnicity for students who recently graduated from Kennesaw State University with a bachelor’s in civil eng.
|Race/Ethnicity||Number of Students|
|Black or African American||15|
|Hispanic or Latino||8|
KSU Georgia Civil Engineering Master’s Program
64%RACIAL-ETHNIC MINORITIES*For the most recent academic year available, 100% of civil eng master’s degrees went to men and 0% went to women.
In the civil eng master’s program at this school, racial-ethnic minorities make up 64% of degree recipients. That is 38% better than the national average.*
The following table and chart show the race/ethnicity for students who recently graduated from Kennesaw State University with a master’s in civil eng.
|Race/Ethnicity||Number of Students|
|Black or African American||2|
|Hispanic or Latino||1|
KSU Georgia also has a doctoral program available in civil eng. In 2019, 0 student graduated with a doctor’s degree in this field.
- Environmental Engineering
- Other Engineering
- Construction Engineering
- Systems Engineering
- Computer Engineering
Careers That Civil Eng Grads May Go Into
A degree in civil eng can lead to the following careers. Since job numbers and average salaries can vary by geographic location, we have only included the numbers for GA, the home state for Kennesaw State University.
|Occupation||Jobs in GA||Average Salary in GA|
|Architectural and Engineering Managers||4,740||$142,240|
The racial-ethnic minorities count is calculated by taking the total number of students and subtracting white students, international students, and students whose race/ethnicity was unknown. This number is then divided by the total number of students at the school to obtain the racial-ethnic minorities percentage.
Master of Science in Civil EngineeringChange Course
|About this course|
- MS Civil Engineering program is offered by Southern Polytechnic College of Engineering and Engineering Technology
- MS Civil Engineering program offers three concentrations areas: Structural and Geotechnical Engineering, Transportation and Pavement Engineering and Environmental Engineering and Water Resources
- Students will study courses such as Probabilistic Analysis and Reliability in Civil Engineering, Finite Element Analysis, Structural Dynamics, etc
Fees & ExpensesUSDINR1st year tuition fees
|Tuition & fees||INR 13,39,913|
Other expenses in 1st year
|Application Fees||INR 4,379|
|Student Fees||INR 1,46,398|
Calculated at the exchange rate of 1 USD = INR 72.98|
Tuition & expenses were last updated on 31ˢᵗ August 2016Entry Requirements
|Entry requirements for this course|
|Class 12th||No specific cutoff mentioned|
|Bachelors||3.0 GPAApplicants must have a bachelors degree with a minimum GPA of 3.0 or equivalent in relevant field|
|Exams||TOEFL : 80IELTS : 6.5|
|Additional info||•Official transcripts from each college or university attended •Official Evaluation of all foreign transcripts. Transcripts must be evaluated by Evaluation Service, Inc. , Joseph Silney & Associates, Inc. or World Education Services (WES) •English Language Proficiency Proof •Proof for funds •Copy of your Passport|
Making the decision to go back to school is not always an easy one, especially for those who already have a career. However, earning a master’s in mechanical engineering can help you leverage your career and get opportunities that wouldn’t be available to you without that extra education.
|1||Kennesaw State University (45 Points)||Kennesaw, Georgia|
|2||New Mexico Institute of Mining and Technology (44 Points)||Socorro, New Mexico|
|3||Oklahoma State University-Main Campus (41 Points)||Stillwater, Oklahoma|
|4||University of New Mexico – Main Campus (40 Points)||Albuquerque, New Mexico|
|5||Missouri University of Science and Technology (37 Points)||Rolla, Missouri|
With hundreds of universities to choose from, how do you know which one is right for you? We can help because our experts have done the research to determine which ones are worth investing your time and money into. We also used a ranking system to put the schools in order from our top choice to our 25th choice and will discuss our point system later in this article. Without further ado, here is our list of top 25 colleges that offer masters in mechanical engineering.1
Kennesaw State University (45 Points)
- Kennesaw, Georgia
- Graduation Rate: 41%
Located in Kennesaw, Georgia, Kennesaw State University is a graduate school that offers over 40 programs, including one in mechanical engineering. This 30-credit master’s program is geared towards working professionals who want to further their education but may not have the time to take classes on campus. This is done through their extensive distance learning courses, allowing students to earn a living and further their career all at the same time.
Annual Tuition: $5,328Students Enrolled in the Graduate Program: 3,308
New Mexico Institute of Mining and Technology (44 Points)
- Socorro, New Mexico
- Graduation Rate: 49%
The Graduate program in the Mechanical Engineering Department at New Mexico Institute of Mining and Technology has been ranked as one of the nation’s top STEM schools. This program offers PhD, MS, and ME degrees in specializations of Explosives Engineering, Fluid & Thermal Sciences, Mechatronics and Robotics, Solid Mechanics, and allows students to solve some real-world problems with funded projects that have been sponsored by government agencies, industries, and national laboratories. Scholarship and networking opportunities are abundant at this highly ranked school.
Annual Tuition: $7,160Students Enrolled in the Graduate Program: 511
Oklahoma State University-Main Campus (41 Points)
- Stillwater, Oklahoma
- Graduation Rate: 63%
The Master’s of Mechanical and Aerospace Engineering at Oklahoma State University has worked with some of the nation’s biggest names in engineering, including the one and only NASA. This university teaches students from across the globe every year, making campus life a very inclusive and diverse one.
Annual Tuition: $5,531Students Enrolled in the Graduate Program: 4,038
University of New Mexico – Main Campus (40 Points)
- Albuquerque, New Mexico
- Graduation Rate: 44%
With a student-to-faculty ratio of 17:1, the University of New Mexico has small class sizes that will allow students to get the attention and help they need from the professors and staff. This school is located in Albuquerque, New Mexico, and has a wide range of student organizations available on campus to give students a more hands-on approach to mechanical engineering, including the American Society of Mechanical Engineers, Formula Society of Automotive Engineers, and Society of Women Engineers.
Annual Tuition: $5,156Students Enrolled in the Graduate Program: 5,399
Missouri University of Science and Technology (37 Points)
- Rolla, Missouri
- Graduation Rate: 64%
The Missouri University of Science and Technology is ranked as the 15th Smartest Public College in the United States and offers a comprehensive graduate program. In this program, students will be able to conduct thorough research in the laboratories and centers that can be found on campus. Fellowships are available to selected students that could grant future mechanical engineers up to $45,000.
Annual Tuition: $10,452 Students Enrolled in the Graduate Program: 1,634
Mississippi State University (36 Points)
- Starkville, Mississippi
- Graduation Rate: 60%
The Mechanical Engineering Department at Mississippi State University is the third-largest program in the entire university and is well-known for its excellence in engineering education, research, scholarships, service, and outreach, both at a national and international level. Mechanical engineering students are given the option of either a non-thesis program that requires 24 credits or a thesis program that requires 30 credits to graduate.
Annual Tuition: $8,800Students Enrolled in the Graduate Program: 3,434
Texas Tech University (35 Points)
- Lubbock, Texas
- Graduation Rate: 60%
Located in Lubbock, Texas, Texas Tech University is a large university with a rich history. This school was founded in 1923 due to legislative action and has grown to be one of the largest universities in the western two-thirds of Texas. Since it first opened its doors, Texas Tech University has been educating professionals in a wide range of industries, including mechanical engineering.
Annual Tuition: $5,958Students Enrolled in the Graduate Program: 6,617
University of North Dakota (33 Points)
- Grand Forks, North Dakota
- Graduation Rate: 55%
Since 1883, the University of North Dakota has been putting Grand Forks, North Dakota on the map as one of the largest universities in the midwest. It has an average class size of 24 and has grown by 38% over the past 3 years. UND offers a combined Bachelor’s and Master’s degree program that will allow mechanical engineering students the opportunity to finish both degrees in 5-6 years.
Annual Tuition: $10,534Students Enrolled in the Graduate Program: 3,418
Kansas State University (32 Points)
- Manhattan, Kansas
- Graduation Rate: 63%
Kansas State University is located in Manhattan, Kansas, and has over 70 online and in-person graduate programs to choose from. Their mechanical engineering master’s program is completely online but will require a trip to the midsized campus to take an oral exam as the student reaches the finish line of their degree.
Annual Tuition: $10,212Students Enrolled in the Graduate Program: 4,509
University of Central Florida (30 Points)
- Orlando, Florida
- Graduation Rate: 75%
Among some of the many awards, this Orlando-based college has received include being one of the top 50 public graduate engineering colleges in the nation, having one of the top 15 online programs in the country, and being named one of the nation’s “Most Innovative” universities. The University of Central Florida has received millions of dollars in grant money to ensure the engineering students can participate in research and real-world projects that could help their community.
Annual Tuition: $6,916Students Enrolled in the Graduate Program: 10,031
Michigan Technological University (28 Points)
- Houghton, Michigan
- Graduation Rate: 67%
You can find, accelerated, online, and in-person mechanical engineering graduate programs at Michigan Technology University, providing education that meets the unique needs of all students. A long list of engineering specialties is available to study, including design and dynamic systems, energy and thermo-fluids, solid mechanics, and manufacturing and industrial areas of interest.
Annual Tuition: $20,511Students Enrolled in the Graduate Program: 1,277
The University of Alabama (27 Points)
- Tuscaloosa, Alabama
- Graduation Rate: 68%
For over 175 years, the University of Alabama has been offering mechanical engineering education. This midsize college can be found in Tuscaloosa, Alabama, and has small class sizes, with a student-to-faculty ratio of 20:1. There are over 300 faculty and staff members available to help the students become successful once they graduate.
Annual Tuition: $10,780Students Enrolled in the Graduate Program: 5,305
Texas A&M University – College Station (26 Points)
- College Station, Texas
- Graduation Rate: 80%
The large campus of Texas A&M University houses over 69,000 students in the Dallas area for a variety of majors and certificates. The acceptance rate for this public university is somewhat more competitive than many of the other colleges on our list with an acceptance rate of 68%. Texas A&M University was ranked #17 of 676 for Top Public Universities in America.
Annual Tuition: $6,677Students Enrolled in the Graduate Program: 14,935
Auburn University (25 Points)
- Auburn, Alabama
- Graduation Rate: 75%
The beautiful, historical Auburn University opened its doors more than 160 years ago and continues to get praised by critics and students alike, including being ranked as a “Best Value College” by Forbes. Several fellowship and assistantships are available to help with the cost of tuition.
Annual Tuition: $11,492Students Enrolled in the Graduate Program: 5,866
North Carolina State University at Raleigh (24 Points)
- Raleigh, North Carolina
- Graduation Rate: 77%
What began as a land-grant university for agriculture and engineering transformed into a leading public research university. North Carolina State University has a thesis and non-thesis master’s program available in mechanical engineering and was ranked by College Choice as one of the Best Mechanical Engineering Degrees.
Annual Tuition: $9,095Students Enrolled in the Graduate Program: 10,331
The University of Texas at Arlington (23 Points)
- Arlington, Texas
- Graduation Rate: 57%
The University of Texas at Arlington was founded in 1895 and is located in the beautiful Dallas-Fort Worth area. This large university prides themselves in preparing their students for the workforce the moment they graduate and have succeeded at being the institution that graduated two astronauts and numerous executives at Fortune 500 companies.
Annual Tuition: $8,474Students Enrolled in the Graduate Program: 13,815
Lehigh University (22 Points)
- Bethlehem, Pennsylvania
- Graduation Rate: 89%
The small campus of Lehigh University can be found in Bethlehem, Pennsylvania, and has a student-to-faculty ratio of 9:1. Students will get the opportunity to work with faculty and industry professionals from other countries for a more comprehensive education. Its Master of Science degree in Mechanical Engineering requires 30 credits to graduate and will allow students to research and solve engineering programs with faculty and scholars.
Annual Tuition: $27,000Students Enrolled in the Graduate Program: 1,775
Colorado State University-Fort Collins (20 Points)
- Fort Collins, Colorado
- Graduation Rate: 67%
ABOUT COLORADO STATE UNIVERSITY
As one of the nation’s top public research universities, Colorado State University in Fort Collins, Colorado, is a land-grant institution, with enrollment of more than 33,000 students. CSU offers 76 undergraduate degree programs, 114 graduate degree programs, 21 professional master’s degree programs, and a Professional Veterinary Medicine program. CSU’s world-class research and scholarship attract more than $400 million in research funding annually, putting the university among top federally funded public universities without a medical school. Colorado’s Front Range is a high-tech hub with companies such as Woodward, Hewlett-Packard Enterprise, IBM, Intel, Keysight Technologies, Broadcomm, AMD, Xilinx, Ball Aerospace, Lockheed Martin, Raytheon, and Northrop Grumman located in or near Fort Collins.
ABOUT CSU’S DEPARTMENT OF MECHANICAL ENGINEERING
The Department of Mechanical Engineering (ME) at CSU offers a curriculum that integrates exceptional classroom learning and in-depth engineering practice for an unparalleled educational experience. Made up of 42 faculty members, 12 staff members, 1,000 undergraduate students, and 125 graduate students, ME is one of the largest departments and most popular majors on CSU’s campus. State-of-the-art labs provide unmatched, hands-on experience to help undergraduate students conceptualize industry environments. About $7.5M in annual research funding provides groundbreaking opportunities focusing on health, materials, and energy for graduate students to enhance their educational concentrations. Award-winning faculty offer industry and academic perspective and equip each graduate with the tools needed to obtain leading positions in advanced technology fields. For more information about the department, go to www.engr.colostate.edu/me.
Annual Tuition: $11,901Students Enrolled in the Graduate Program: 7,637
University of Arizona (18 Points)
- Tucson, Arizona
- Graduation Rate: 60%
It is like a vacation year-round when on the campus of the University of Arizona because of its warm, sunny climate. This institution has a rich Native American heritage and provides both an online and in-person education for its mechanical engineering students. While the campus does offer a world-class education, they are slightly selective in the students they accept, requiring at least a GPA of 3.25 and GRE scores that are in the top 25th percentile.
Annual Tuition: $11,938Students Enrolled in the Graduate Program: 10,061
University of Pittsburgh – Pittsburgh Campus (13 Points)
- Pittsburgh, Pennsylvania
- Graduation Rate: 81%
With 15,000 employers recruiting students for their companies, finding employment after graduation at the University of Pittsburgh she not be a problem. Although this is a large institution, class sizes remain small with a student-to-faculty ratio of 14:1. The Department of Mechanical Engineering and Materials Science has state-of-the-art laboratories ready to use as a way to provide research opportunities for students. Professional, or non-thesis, and research tracks are available.
Annual Tuition: $23,530Students Enrolled in the Graduate Program: 9,301
Michigan State University (12 Points)
- East Lansing, Michigan
- Graduation Rate: 78%
Ranked as number 32 for Top Public U.S. Universities, Michigan State University has grown a reputation of being an inclusive and intercultural campus. The online Master of Science degree in Mechanical Science will receive the support of a research team and a faculty advisor to ensure the students’ professional goals are being met. There are two tracks available for students to pursue, including Thermal Fluids Science and Engineering and Mechanics, Dynamics, and Manufacturing.
Annual Tuition: $18,858Students Enrolled in the Graduate Program: 10,633
University of Washington – Seattle Campus (9 Points)
- Seattle, Washington
- Graduation Rate: 84%
The University of Washington hasn’t only received recognition as being an excellent institution in the U.S. but was also ranked as number 14 in the world on the Academic Ranking of World Universities in 2018. The master’s program is available to all students who have completed courses in math, physics, natural science, and engineering fundamentals. This program is available both in-person and online.
Annual Tuition: $18,198Students Enrolled in the Graduate Program: 15,530
The University of Illinois at Urbana – Champaign Campus (8 Points)
- Urbana, Illinois
- Graduation Rate: 85%
Founded in 1867, the University of Illinois at Urbana-Champaign has earned 29 Pulitzer Prizes and a ranking of number 14 for Top Public University. Students travel from all over the globe to attend this institution because of its reputation of being a world-leader in education. The University of Illinois at Urbana – Champaign has over 50,000 students, but still keeps class sizes small, with a student-to-faculty ratio of 20:1.
Annual Tuition: $14,997Students Enrolled in the Graduate Program: 17,485
Georgia Institute of Technology-Main Campus (7 Points)
- Atlanta, Georgia
- Graduation Rate: 86%
Located in the bustling city of Atlanta, Georgia, the Georgia Institute of Technology is a leading research university in the United States, as well as a top-ranked public college. This college has one of the largest mechanical engineering programs in the country, giving students the research and real-world experience they need to become successful mechanical engineers. A study abroad program is also available for additional educational opportunities, which is something over half of the students in this program participate in.
Annual Tuition: $14,064Students Enrolled in the Graduate Program: 20,338
Pennsylvania State University – World Campus (5 Points)
- University Park, Pennsylvania
- Graduation Rate: 38%
Pennsylvania State University provides online education to more than 20,000 students nationally and internationally. This institution was first established in 1998 and provide highly-ranked education without requiring students to attend courses on campus. This 32-credit program was recognized by U.S. News as being the Best Online Program in 2020. Some of the topics you can expect to learn about are the principles of turbomachinery, automatic control systems, and the foundation of fluid mechanics.
Annual Tuition: $21,682Students Enrolled in the Graduate Program: 15,328